Fanuc and Siemens, together on one dashboard
If your shop floor mixes brands, you still get one view.
| Control | Brand | Typical use | Status |
|---|---|---|---|
| Fanuc 0i-MF Plus | Fanuc | Milling | Supported |
| Fanuc 0i-MF | Fanuc | Milling | Supported |
| Fanuc 0i-MD | Fanuc | Milling | Supported |
| Fanuc 0i-TD | Fanuc | Turning | Supported |
| Fanuc 0i-TF | Fanuc | Turning | Supported |
| Fanuc 32i-B Plus | Fanuc | Milling and turning | Supported |
| Siemens SINUMERIK 828D | Siemens | Milling and turning | Supported |
The control must be connected to your plant network. Some machines need a network option enabled on the control; we check this during the site visit.
What we check before we start
Network
The machine is reachable on your plant network, with a fixed address.
Control settings
The control is set up to share its data. We guide your technician through this.
Your model
Not on the list? Send us the control name and we will tell you if it is supported.
Not sure your machine is on the list?
Send us the control model. We will answer before you commit to anything.